Motorola APX 1000 Basic Service Manual page 442

8-8
8.4.4 Remove Accessory-Connector Cover (38)
!
a u t i o n
1. Unscrew the thumb screw. If the screw is too tight, use an Allen wrench.
NOTE: Do not remove the screw. It should remain captive in the cover.
2. Slightly swing the Accessory-Connector Cover away from radio before sliding it upward to
disengage the hook.
3. Pull the Accessory-Connector Cover away from the radio.
When the accessory connector is not in use, keep it covered
with the Accessory-Connector Cover (38).
Figure 8-7. Removing the Thumb Screw
Disassembly/Reassembly Procedures: Radio Disassembly
Thumb Screw with Hex Head Socket