Display Radio Test Mode - Motorola APX 1000 Basic Service Manual

Performance Checks: Display Radio Test Mode
5.2

Display Radio Test Mode

This section provides instructions for performing tests in display radio test mode.
5.2.1 Access the Test Mode
To enter the display radio test mode:
1. Turn the radio on.
2. Within 10 seconds, press Side Button 2 five times in succession.
The radio shows a series of displays that give information regarding various version numbers
and subscriber specific information. The displays are described in
Name of Display
Service
Host version
DSP version
Model number
Serial number
ESN
ROM Size
FLASHcode
RF band 1
Tuning Ver
Proc Ver
Option Board
Type
Option Board
Serial Number
Option Board
Sw Version
Exp Board Type
Table 5-2. Test-Mode Displays
Description
The literal string indicates the radio has
entered test mode.
The version of host firmware is displayed.
The version of DSP firmware is displayed.
The radio's model number, as
programmed in the codeplug
The radio's serial number, as programmed
in the codeplug
The radio's unique electronic serial
number
The memory capacity of the host FLASH
part
The FLASH codes as programmed in the
codeplug
The radio's operating frequency
Version of Tuning codeplug
Version of Processor
Type of Keypad board being used
Serial number of the Keypad board is
displayed
Software version of the Keypad Board is
displayed
Type of Keypad Board is displayed
Table 5-2.
Appears
Always
Always
Always
Always
Always
Always
Always
Always
Always
Always
Always
When the radio has an Option
Board/Expanded Keypad Board.
When the radio has an
Expanded Keypad Board.
When the radio has an
Expanded Keypad Board.
When the radio has a Keypad
Board.
5-3