Siemens SINUMERIK 840D Programming Manual page 238

Turning Cycles 03.96
08.99
4 4
4.5 Stock removal cycle – CYCLE95
Programming example 2
Stock removal cycle
X
The machining contour is defined in the calling
program and traversed directly after the finishing
cycle call.
P5 (50.50)
P4 (50.41.547)
P3 (70.21.547)
P2 (90.10)
P1 (100.10)
Z
N110 G18 DIAMOF G90 G96 F0.8
N120 S500 M3
N130 T11 D1
N140 G0 X70
N150 Z60
Cycle call
N160 CYCLE95 ("START:END",2.5,0.8, ->
0.8,0,0.8,0.75,0.6,1)
START:
N180 G1 X10 Z100 F0.6
N190 Z90
N200 Z=AC(70) ANG=150
N210 Z=AC(50) ANG=135
N220 Z=AC(50) X=AC(50)
END:
N230 M02
 Siemens AG 2000 All rights reserved.
4-238
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide, Cycles (PGZ) - 04.00 Edition