Boring 3 – Cycle87 - Siemens SINUMERIK 840D Programming Manual

Drilling Cycles and Drilling Patterns
2
2.1 Drilling cycles
2.1.9 Boring 3 – CYCLE87
Programming
CYCLE87 (RTP, RFP, SDIS, DP, DPR, SDIR)
Parameters
RTP
real
RFP
real
SDIS
real
DP
real
DPR
real
SDIR
int
Function
The tool drills at the programmed spindle speed and
feedrate to the programmed final drilling depth.
With Boring 3, a spindle stop without orientation M5 and
then a programmed stop M0 are generated when the
final drilling depth is reached. The NC START key is
pressed to continue the retraction movement in rapid
traverse mode until the retraction plane is reached.
2-82
Retraction plane (absolute)
Reference plane (absolute)
Safety clearance (enter without sign)
Final drilling depth (absolute)
Final drilling depth relative to reference plane (enter without sign)
Direction of rotation
Value: 3 (for M3)
4 (for M4)
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide, Cycles (PGZ) - 04.00 Edition
03.96
2
 Siemens AG 2000 All rights reserved.