Siemens SINUMERIK 840D Programming Manual page 261

03.96
04.00
4
4.10 Extended stock removal cycle - CYCLE950 (SW 5.3 and later)
_FF2
real
_FF3
real
_FF4
real
_VRT
real
_ANGB
real
_SDIS
real
_NP5
string
_NP6
string
_NP7
string
_NP8
string
_APZ
real
_APZA
int
_APX
real
_APXA
int
_TOL1
real
 Siemens AG 2000 All rights reserved.
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide, Cycles (PGZ) - 04.00 Edition
Feedrate for face roughing
Feedrate for finishing
Feedrate at contour transition elements (radius, chamfer)
Liftoff distance for roughing, incremental (enter without sign)
Liftoff angle for roughing
Safety clearance for avoiding obstacles, incremental
Name of contour program for blank contour
Label / block number start of blank contour, optional
this can be used to define contour sections)
(
Label / block number end of blank contour, optional
(this can be used to define contour sections)
Name of contour program for updated blank contour
Axial value for defining blank for longitudinal axis
Absolute or incremental evaluation of parameter _APZ
90=absolute, 91=incremetal
Axial value for defining blank for facing axis
Absolute or incremental evaluation of parameter _APX
90=absolute, 91=incremetal
Blank tolerance
Turning Cycles
4
4-261