Siemens SINUMERIK 840D Programming Manual page 291

04.00
A
CPU
CR
CRT
CSB
CTS
CUTOM
DAC
DB
DBB
DBW
DBX
DC
DCD
DCE
DDE
DIN
DIO
DIR
DLL
DOS
DPM
DPR
 Siemens AG 2000 All rights reserved.
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Cycles (PGZ) - 04.00 Edition
Central Processing Unit
Carriage Return
Cathode Ray Tube: Teletube
Central Service Board: PLC module
Clear To Send: Clear To Send for serial interfaces
Cutter radius compensation: Tool radius compensation
Digital analog converter
Data block on the PLC
Data block byte on the PLC
Data block word on the PLC
Data block bit on the PLC
Direct Control: Movement of the rotary axis across the shortest
path to the absolute position within one revolution
Carrier Detect
Data communication equipment
Dynamic Data Exchange
German Industrial Standard
Data Input/Output
Directory
Dynamic Link Library
Disk Operating System
Dual Port Memory
Dual port RAM
Appendix
A
Abbreviations
A-291