ABB AC500 Introduction Manual page 112

The available parameters are displayed.
Example: Changing the input delay of the module DC532.
Highlight the line of the desired parameter: move the cursor to that line and press the left mouse button.
Double click with the left mouse button onto the highlighted line. Click with the left mouse button on
to display the values available. Select the desired value by clicking with the left mouse button on that
value. Click with the left mouse button into the area with the empty lines. Thus the change has been
adopted.
After you have changed all the desired parameters, click on OK to exit the parameter configuration.
The configuration of the fieldbus modules is finished. Now the names of the communication variables
used for data exchange between coupler and CPU program have to be specified. Proceed as follows to
specify the variables (these variables are automatically forwarded to the AC500 Control Builder software
in order to have them available there):
____________________________________________________________________________________________________________
G1
Introduction to AC500 1-110
AC500 / Issued: 07.2006