ABB AC500 Introduction Manual page 124

For AC1131 experts –
connection S500-FBP I/O module to series 90
Example with an AC31 Series 90 CPU as PROFIBUS DP Master and a DC505-FBP as
remote I/Os
+
24 V DC
PDP22-FBP
Figure: Example with an AC31 series 90 CPU as PROFIBUS DP master and a DC505-FBP as remote
I/Os
The following example will guide you through the installation and the configuration of a small PROFIBUS
DP fieldbus using an AC31 PLC as PROFIBUS DP Master and a S500-FBP remote I/O station with a
modular FBP.
This example could be used as starting point to realize your own application.
ATTENTION
____________________________________________________________________________________________________________
G1
Introduction to AC500
PDA11-FBP.050
AdvantController31
BasicUnit
07 KT 97/98 DP
DC505
DC505-FBP + DC532 + AX522
PDR11-FBP.150
Refer to the dedicated User's manuals or Installation guides of the
FieldBusPlug and the AC31 PLCs and programming software.
+/– 24 V DC
RUN
STOP
COM2
07 KT 98
COM1
PC
DC532 AX522
+
24 V DC
–
1-122
AC500 / Issued: 07.2006