GEN
INFO
Technical tips
Cam position sensor failure control
The cam position sensor failure control is activated under the following conditions.
• If the cam position sensor failed.
• If the engine speed exceeds about 1,000 r/min.
• If the above conditions are maintained for 10 seconds.
Meter & buzzer: No indication or buzzer sounds.
ECM: The opening angle of the ETV is regulated and the engine speed is limited to 3,500–3,800
r/min.
If the engine speed exceeds 5,000 r/min, the ECM cuts the ignition and fuel injection.
Cancel: The engine is turned off.
Battery disconnection warning
The ETV failure control is activated when a battery cable is disconnected during normal operation.
1-50
E
1
2
3
4
5
6
7
8
9