Huawei EchoLife ET323 User Manual page 30

EchoLife ET523 IP Phone User Manual
Item
Display
Config
Configuration Description
Do NOT Disturb
The DND function is turned on or off in the DO NOT Disturb
menu.
Ring Tone
Select different ring tones in the Ring Tone menu.
Ring Volume
Press OK to hear the selected ring volume. Press LEFT or
RIGHT to hear and adjust the ring volume.
Download SCR XML
The phone will download the custom idle screen (if available).
Erase Custom SCR
The custom idle screen will be erased and replaced by the default
Huawei logo.
Press OK to select the menu item.
Press LEFT or select Back to return to the main menu.
Select the Config submenu in the main menu. Press OK to display
the configuration selections:
Network
Enable/disable DHCP.
Set the IP address, subnet mask and gateway address through the
keypad if the static IP mode is selected.
SIP
Change SIP server settings for each account, including account,
SIP proxy and outbound proxy, SIP user ID, SIP Auth ID, SIP
password SIP transport and audio CODECs.
Upgrade
Configure the firmware server and config server. Select either
TFTP or HTTP to upgrade the firmware or configure the phone.
Factory Reset
Key in the physical MAC address located on back of the phone.
Press OK to restore the factory reset settings. Factory reset clears
all configurations and restores the phone to factory settings.
Press LEFT or select Back to return to the main menu.
25
4 Configuration Guide