Huawei EchoLife ET323 User Manual page 50

EchoLife ET523 IP Phone User Manual
Table 4-5 SIP account configuration
Field
Account Active
Account Name
SIP Server
Outbound Proxy
SIP User ID
Authenticate ID
Authenticate
Password
Name
Use DNS SRV
User ID is
Phone Number
Description
This field indicates whether the account is active. The default
value for each account is Yes.
The name corresponding to each account. Only the primary
account (Account 1) will be displayed on LCD. The account
name will be shown on the LCD when you answer a call, or in
the hands-free and off-hook modes.
IP address or domain name of the SIP server, which is provided
by the VoIP service provider.
IP address or domain name of outbound proxy, media gateway
or session border controller.
It is used for the firewall or NAT penetration in different
network environment. If the system detects symmetric NAT,
STUN will not work. Only the outbound proxy can provide
solution for symmetric NAT.
User account information provided by the VoIP service provider
(ITSP). It can be digits in a phone number format or an actual
phone number.
SIP service subscriber' s authenticate ID used for authentication.
It can be identical to or different from SIP user ID.
SIP service subscriber' s account password for the ET523 to
register to (SIP) servers of the ITSP.
SIP service subscriber' s name that is used as the caller ID and
displayed on the callee's LCD (this feature needs to be supported
by the SIP server). When the phone in the idle mode, the account
name of Account 1 will be displayed on the LCD.
The default value is No. If it is set to Yes, the client will use DNS
SRV to search the server.
DNS SRV: Dialing by domain names allows the SIP user have a
single public SIP address, which can be redirected at will to their
current location. SRV records maintain stability and also provide
the possibility of using your own domain, regardless of the
domain of the SIP service you are using.
If the phone has an assigned PSTN telephone number, this field
should be set to Yes. Otherwise, set it to No. When it set to Yes,
the " user=phone"parameter will be attached to the From header
in SIP request.
45
4 Configuration Guide