Software Upgrade & Customization; Firmware Upgrade Through Tftp/Http; Keypad Menu; Web Configuration Interface - Huawei EchoLife ET323 User Manual

EchoLife ET523 IP Phone User Manual
5
Software Upgrade & Customization
Upgrade the software (or firmware) through either TFTP or HTTP. The corresponding
configuration settings are in the ADVANCED SETTINGS configuration page.

Firmware Upgrade Through TFTP/HTTP

To upgrade through TFTP or HTTP, select TFTP or HTTP upgrade method. Set
Upgrade Server to a valid URL of a HTTP server. The server name can be in either
FQDN or IP address format. Here are examples of valid URLs.

firmware.mycompany.com:6688/Huawei/ET523

168.75.215.189
There are two ways to set up the Upgrade Server to upgrade firmware:


Keypad Menu



Web configuration interface

Keypad Menu
Select Config > Upgrade to configure the upgrade server through the keypad menu.
Under the submenu, you can edit the IP address and domain name of the upgrade server.
Select TFTP or HTTP in the Upgrade Via menu. Press LFET to exit the menu. Then
select Reboot in the main menu to reboot the phone.
Web Configuration Interface
To configure the upgrade server through the web configuration interface, open the web
browser. Enter the ET523 IP address. Enter the admin password to access the web
configuration interface. In the Advanced Settings page, select the TFTP or HTTP
upgrade method. In the Firmware Server Path field, enter the IP address or FQDN of
the firmware server. In the Config Server Pat field, enter the IP address or FQDN of
the config server. For example, if the server's IP address is 192.169.9.31, and the
firmware and configuration files are located in the directory " /dir" , then you need to
input 192.169.9.31/dir in the above motioned fields. Update the change by clicking the
Update button. Reboot or power cycle the phone to update the new firmware.
To configure the upgrade server through the web configuration interface, open the web
browser. Then do as follows.
5 Software Upgrade & Customization
51