Mitsubishi Electric R32MTCPU Programming Manual page 61

Read the encoder value of the gray code encoder with a sequence program, and update "[Cd.325] Input value for
synchronous encoder via device (D14826+10n, D14827+10n)" of the synchronous encoder axis 4 at every time.
[Motion Control Parameter]  [Synchronous Control Parameter]  [Input Axis Parameter]  [Synchronous Encoder
Axis Parameter]
Window
■Restrictions
The synchronous encoder current value that is restored for the synchronous encoder connection gets restored into a
converted value from the following range based on the synchronous encoder travel value on disconnection.
Setting value of "[Pr.329] Resolution of
synchronous encoder via device"
1 or more
0
Multiple CPU advanced synchronous control
Used to operate the servo input axis, command generation axis, and synchronous encoder axis of the master CPU as the
synchronous encoder axis.
By setting the input axis type of the master CPU in "[Pr.320] Synchronous encoder axis type" to the following, the change from
the master CPU is used as the input value for operating the synchronous encoder axis.
Refer to selection of slave CPU input axis type for details on the setting method. (Page 164 Selection of slave CPU input
axis type)
Input axis of the master CPU
Master CPU servo input axis
Master CPU command generation axis
Master CPU synchronous encoder axis
Range of restored synchronous encoder current value
- (Resolution of synchronous encoder via device  2) to + (Resolution of synchronous encoder via
device  2 - 1)[pulse]
*: If the resolution of a synchronous encoder via device is an odd number, round down a negative
value after the decimal point, round up a positive value after decimal point.
-2147483648 to 2147483647[pulse]
Setting value
301: Master CPU servo input axis
401: Master CPU command generation axis
501: Master CPU synchronous encoder axis
4 INPUT AXIS MODULE
4.3 Synchronous Encoder Axis
4
59