Console Rear Panel Connections And Controls; Connecting Power - Philips 64331 Operation Manual

Console Rear Panel Connections and Controls

Figure 4 identifies all the connections and controls on the rear panel of the 200 Plus Control Console. Detailed
information is contained throughout the manual for each connection. Below is a list of connections and their purpose.
Power
Switch
Power Input
Ethernet Port (RJ45)
USB Port (Library Storage)
NOTES:
(1) DMX BASE is an advanced DMX512 port for the DMX BASE feature in the console. Please see
page 58
for details.
(2) The DMX512 connection is the primary DMX512 port.
Figure 4: 200 Plus Series Console Rear Panel Connections and Controls
Power Switch
Turns console On or Off. Note, turning off this switch does not disconnect power from console.
Power Input
Power into console from universal (AC to DC) power supply.
Ethernet Port (RJ45)
Art-Net connection for faster communication with the other compatible devices.
USB Port (Library Storage)
USB connection for connection of a USB drive to load libraries, save shows, or update console software.
VGA Out (Monitor)
VGA connection for driving a VGA video monitor.
details. Note, video monitor sold separately." on page 9
DMX512 In
DMX512 input connection for DMX512 signals from another console or device.
page 10 for details.
DMX512 Out (2 Connections)
DMX512 output connections for controlling DMX512 devices. The DMX BASE port allows output for DMX Based
functions. The DMX512 port allows output of DMX from the consoles functions.
page 10 for details.

Connecting Power

The power supply shipped with your 200 Plus Series Console is an auto-ranging, universal voltage supply. It operates
between 90 to 240 VAC.
To connect the power supply:
Step 1. As shown in Figure 5, make sure unit's power switch is set to "Off"
VGA Out (Monitor)
See "Connecting Power" on page 9
See "VGA connection for driving a VGA video monitor. for
for details. Note, video monitor sold separately.
200 Plus Series Console
DMX BASE
DMX512 In
"Update DMX Base" on
for details.
See "Connecting DMX512" on
See "Connecting DMX512" on
Getting Started
DMX512
(2)
(1)
9