Copying A Scene; Inserting A Cue - Philips 64331 Operation Manual

Copying a Scene

It is possible to copy a scene from one scene to another in an FX stack.
1) To access this function press RECORD and then the FX you wish to work with. The FX button will flash
blue.
2) Select the scene you wish to copy by holding down the flash button associated with it. The LCD screen will
appear as shown in Figure 53.
Menu
Release
DMX Base
FX
3) Press SOFTKEY A "Copy To".
4) Now press the flash button where you wish to copy the scene to.
5) Use SOFTKEY .
6) Exit by pressing SOFTKEY C "Record FXBase" to update the FX stack.
Note: This is a useful tool if you wish to use a look you have previously created in a new cue.

Inserting a Cue

It is possible to insert a scene into an FX stack provided you have not used all the scenes available for the FX
stack.
1) To access this function press RECORD and then the FX where you wish to work. The FX button will flash
blue.
2) Select the scene where you wish to insert a scene by holding down the flash button associated with it. The
LCD screen will display as shown in Figure 54.
Menu
Release
DMX Base
FX
3) Press SOFTKEY B "Insert" .
4) The scene will move up 1 leaving you a blank scene you can add a look to.
Record FXBase
Master: xxx
Figure 53: Copying a Scene - LCD Display
Record FXBase
Master: xxx
Figure 54: Inserting a Cue - LCD Display
200 Plus Series Console
Copy
A
To
B
Insert
C
Delete
D
Cover
Copy
A
To
B
Insert
C
Delete
D
Cover
FX Programming Tools
51