Philips 64331 Operation Manual page 73

7) Once you have set all the channels it is possible to use the Channel Traits screen to set the steps for a
channel. For instance, the moving light may have a colour wheel where the DMX value for each colour is
given. You can configure these as steps.
8) Once you have finished your fixture you will need to save it. It is recommended that you save the fixture to
the FLIB file on the USB key. This will allow you to access it when you load the fixture library into the
console.
Note: For assistance, please contact your local Authorized Strand Lighting Dealer or Strand Lighting office. A
complete listing of Strand Lighting offices is found on the inside cover of this manual.
200 Plus Series Console
Creating a New Fixture Library
71