Philips 64331 Operation Manual page 27

• SOFTKEY B "Down" will lower the value
• SOFTKEY C ">" is used to navigate between fields.
To rapidly change values hold down the Softkey or use the SOLO fader to change the values extremely quickly.
To store your changes use the SOFTKEY D for "Enter" .
If you wish to leave this screen without storing any changes press the MENU button. It will return you to the previous
screen.
ML Patch
First you need to allocate each fixture in your rig to a preset fader on the console. The Preset A set of Faders are used
in ML mode to control the moving light fixtures. The fader will control the intensity of the fixture and the Flash
button under the fader will be used to select the fixture to allow programming associated with the fixture.
A moving light can have many attributes that control color, pan, tilt, gobos etc.
The first step in patching the fixtures is to select it from the fixture library. To do this you will need to insert the USB
stick with the fixture library on it into the console.
Note: If you do not have the fixture library, it can be downloaded from the Support section on the Strand Lighting
web site at www.strandlighting.com.
Select SOFTKEY A to enter ML Patch. The LCD screen will change to show you the manufacturers' names.
Menu
Release
DMX Base
FX
Manufacturer's Fixture Selection
• SOFTKEY A "BACK" and SOFTKEY B "NEXT" are used to navigate the list of manufacturers.
• SOFTKEY C "MORE" is used to access the next page of manufacturers.
• SOFTKEY D "ENTER" is used to select the manufacturer of the fixture you wish to use.
• SOFTKEY D is used to select the manufacturer whose fixtures you have. The LCD will show the fixtures avail-
able for that manufacturer.
Fixture Starting Address Selection
• SOFTKEY A "BACK" and B "NEXT" are used to navigate the list of fixtures.
• SOFTKEY C "MORE" is used to access the next page of fixtures.
• SOFTKEY D "ENTER" is used to select the fixture you wish to use.
Read 20 Fixture
01: Varilite
02: Martin
25: ELAT
37: Selecon
Master: xxx
Figure 23: ML Patch Screen - LCD Display
200 Plus Series Console
A
Back
B
Next
C
More
D
Enter
Moving Light (ML) Mode
25