Snmpv3 Users - HP ProCurve 6400cl Series Management And Configuration Manual

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
C a u t i o n
14-8

SNMPv3 Users

The second step to use SNMPv3 on the switch is to configure the users that
will be assigned to different groups. To establish users on the switch:
1. Add the users to the User Table. This is done with the snmpv3 user
command. To view the users in the list you use the show snmpv3 user
command. See "Adding Users" on page 14-9.
2. Assign users to Security Groups based on their security model. This is
done with the snmpv3 group command. See"Assigning Users to Groups" on
page 14-10.
Adding a user without authentication and/or privacy to a group that requires
it, will cause the user to not be able to access the switch. You should only add
users to the group that is appropriate for their security parameters