Print Service Use - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
3-9-6

Print Service Use

Print Service Use
As with a DICOM Image Storage Service, the LOGIQ E9 provides three ways to send images to a Print
Service:
1.) Dataflow
2.) Print Button
3.) Send To
The setups and uses are basically the same, except when the Format of the Print Service is set to
something other than 1x1. Then, if the Print Service is tied either to a dataflow with Direct Store set, or
to a print button, the LOGIQ E9 will hold each image in its spooler until the number of images specified
by Format is reached. For example, a Format of 3x4 specifies 12 images per sheet. Until you press the
print button 12 times, the LOGIQ E9 sends nothing to the Print Service. If you press the print button 24
times, the LOGIQ E9 sends the images in two batches of 12 each. Any images left on the spooler when
you start a new exam or end the patient are sent at that point.
3 - 62
PROPRIETARY TO GE
. 7
EV
Section 3-9 - Connectivity Setup and Tips
LOGIQ E9 P
ROPRIETARY
S M
ERVICE ANUAL