Logiq E9 Z-Axis Stuck Down; Z-Axis Gear (1) Jammed Below The Lower, Front Flange (2) Of The Z-Mech Support (Illustration Showing Behind The Drive Gear Assembly) - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
7-9-28

LOGIQ E9 Z-Axis Stuck Down

Use this procedure in the event the Z-Axis Gear (gear that drives the Z-Axis motion) may be driven
beyond the limitations, causing the Z-Axis Gear to jam below the lower, front flange of the Z-Mech
Support. See: Figure 7-202 "Z-Axis Gear (1) jammed below the lower, front flange (2) of the Z-Mech
Support (illustration showing behind the Drive Gear Assembly)" on page 7-337. The lower, front flange
protects exposure to the Drive Gear and Z-Axis Gear.
Figure 7-202 Z-Axis Gear (1) jammed below the lower, front flange (2) of the Z-Mech Support
PROPRIETARY TO GE
. 7
EV
(illustration showing behind the Drive Gear Assembly)
2
Chapter 7 Diagnostics/Troubleshooting
LOGIQ E9 P
2
1
S
ROPRIETARY ERVICE
1
M
ANUAL
7 - 337