Resetting Trigger Logging - Mitsubishi Electric MELSEC iQ-R Series Programming Manual

Resetting trigger logging

LOGTRGR
RnPCPU
RnCPU RnENCPU
(Process)
This instruction resets the trigger condition of the specified logging setting number.
Ladder
(s)
FBD/LD
EN ENO
s
■Execution condition
Instruction
LOGTRGR
Setting data
■Description, range, data type
Operand Description
(s) Logging setting number
EN Execution condition
ENO Execution result
■Applicable devices
Operand Bit
X, Y, M, L,
SM, F, B, SB,
FX, FY

(s)
Processing details
• This instruction resets the LOGTRG instruction of the logging setting number specified by (s). The instruction disables the
LOGTRG instruction of the specified trigger logging setting number.
• The LOGTRGR instruction turns off the special relays (logging completion, logging trigger, and after logging trigger) with
the logging setting number in the device specified by (s).
• If the instruction is executed while buffer data is saved to an SD memory card, the execution of the instruction is made to
wait until all data is saved completely.
Operation error
Error code Description
(SD0)
3405H The value set to (s) is out of the range, 1 to 10.
7 APPLICATION INSTRUCTIONS
1078
7.29 Logging Instructions
RnPCPU RnSFCPU RnSFCPU
(Redundant) (Standard) (Safety)
Execution condition
Word
J\ T, ST, C, D, W,
SD, SW, FD, R,
ZR, RD
 
ST
ENO:=LOGTRGR(EN,s);
Range
1 to 10


Double word
U\G, J\, Z LT, LST,
U3E\(H)G LC
  
Data type Data type (label)
16-bit signed binary ANY16
Bit BOOL
Bit BOOL
Indirect Constant
specification
LZ K,
H
  
Others
E $
  