Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 959

■Applicable devices
Operand Bit
X, Y, M, L, J\
SM, F, B, SB,
FX, FY
(s1)  
 
(s2)
(s3)  
 
(s4)
(d1)  
 
(d2)
■Database field name
Operand: (s3)
Device Item
+0 Number of fields
+1 to + Field name
*1 Programmable controller CPU with firmware version "28" or later supports this processing.
*2 "1" to "16" for a programmable controller CPU with firmware version earlier than "28"
The following figure shows the format of (s3).
b15
(s3)
(s3)+1
1
(s3)+32
n
(s3)+32*n
Word
T, ST, C, D, W, U\G, J\,
SD, SW, FD, R, U3E\(H)G
ZR, RD
 
 
 
 
 
 
Description
Specify the number of fields to which a value is to be added.
Specify a value equal to or less than the number of fields of the table specified in (s2).
If 0 is specified, all fields of the table are subject to output.
Specify the name of each field. Specify field names, each fixed to 32 characters, by
the number of fields with Unicode character strings. For the name less than 32
characters, the character string should be right-justified and filled with 0000H to
become a 32-character string.
The last address  in (s3) varies according to the number of fields.
=32n (n: Number of fields)
This setting of this item is not necessary when "0" is specified in (s3)+0.
specified.)
b0
Set the number of fields, 'n'.
A field name set in the 1st field
A field name set in the 'n'th field
Double word Indirect
specification
Z LT, LST, LZ
LC
   
   
   
   
   
   
*1
*1
(Ignored if
Data for 'n' fields (If zero is
set to (s3), setting for these
data is not required.)
7 APPLICATION INSTRUCTIONS
7.21 Database Access Instructions
Constant Others
K, H E $
   
   
   
   
   
   
Setting range Set by
*2
0 to 128 User

User
957
7