Technical Data - Siemens SINAMICS S120 Equipment Manual

Removing the Control Unit
Removing the CU310 from the Power Module 340 (frame size D)
In order to remove the Control Unit from the Power Module, the blue release lever, as shown
in the diagram, must be pressed downwards and the Control Unit swung-out to the front.
6.3.6

Technical data

Table 6-23 Technical data CU310 PN
Electronics power supply
Voltage
Current (without DRIVE-CLiQ and digital outputs)
Power loss
PE/ground connection
Response time
Weight
Equipment Manual AC Drive
Manual, (GH6), 03/2006 Edition, 6SL3097-2AL00-0BP0
6.3 Control Unit CU310 PN (PROFINET)
Unit
V
DC
A
DC
W
At the housing with M4/3 Nm screw
The response time of digital inputs/outputs depends on the
evaluation (refer to the function diagram).
Reference: /LH1/ SINAMICS S List Manual, Chapter "Function
diagrams".
kg
Control Units
Value
DC 24 (20.4 – 28.8)
0.8
20
0.99
6-33