Mounting - Siemens SINAMICS S120 Equipment Manual

7.2.5

Mounting

Installation
1. Place the component on the DIN rail.
2. Snap the component on to the DIN rail. Make sure that the mounting slides at the rear
3. You can now move the component on the DIN rail to the left or to the right to its final
Removal
Figure 7-6
Equipment Manual AC Drive
Manual, (GH6), 03/2006 Edition, 6SL3097-2AL00-0BP0
Supplementary system components and encoder system integration
latch into place.
position.
Releasing the component from a DIN rail
7.2 Terminal Module 31 (TM31)
7-17