Standards - Siemens SINAMICS S120 Equipment Manual

System overview

1.7 Standards

Electrical data
Installation altitude
Blocksize format units
•
Chassis format units
•
Certificates
Conformity
Approvals
Certification
1.7 Standards
1.7
Table 1-2 Essentially the application-relevant standards
Standards Title
EN 292-1 Safety of Machinery; General Design Guidelines;
Part 1: Basic terminology, methodology
EN 292-2 Safety of Machinery; General Design Guidelines;
Part 2: Technical Principles and Specifications
EN 563 Safety of machinery; temperature of services that can be touched; ergonomic data to define
temperature limit values for hot surfaces
EN 755-9 Aluminum and aluminum alloys - extrusion-pressed bars, pipes and profiles - profiles, limiting
dimensions and form tolerances
EN 954-1 Safety of machinery; safety-related parts of control systems;
Part 1: General Design Principles
EN 1037 Safety of machinery; avoiding unexpected starting
EN 55011 Industrial, scientific and medical high-frequency devices (ISM devices) - radio interference - limit
values and measuring techniques
EN 60146-1-1 Semiconductor converters; general requirements and line-commutated converters;
Part 1-1: Defining the basic requirements
EN 60204-1 Electrical equipment of machines;
Part 1: General definitions
IEC 60228 Conductors for cables and insulated conductors; guidelines for the limiting dimensions of round
cables
EN 60269-1 Low-voltage fuses -
Part 1: General requirements
IEC 60287-1 to -3 Cables - calculated the rated currents
Part 1: Rated current equations (100% load factor) and calculating the losses
Part 2: Thermal resistance -
Part 3: Main sections for operating conditions
EN 60529 Degrees of protection provided by enclosures (IP code)
1-8
Up to 1000 m above sea level without de-rating.
Above 1000 m with current de-rating, linear to 80 % up to 4000 m.
Above 2000 m with voltage de-rating, linear to 77 % up to 4000 m.
Up to 2000 m above sea level NN without de-rating,
above 2000 m up to 4000 m above sea level, refer to de-rating
characteristics.
CE (low-voltage and EMC directives).
cULus.
Safety Integrity Level 2 (SIL 2) acc. to IEC 61508, Safety Category 3
acc. to EN 954-1 for Safety Integrated – Safe Standstill (SH) and Safe
Brake Control (SBC).
Manual, (GH6), 03/2006 Edition, 6SL3097-2AL00-0BP0
Equipment Manual AC Drive