Transport mode - One hand
Right track forward left
track backward
Right track backwards,
left track forward
Rotate tower clockwise
Rotate tower
counterclockwise
Caterpillar tracks forward
Caterpillar tracks
backwards
All outriggers up
All outriggers down
Arm 2 down
Arm 2 up
Arm 1 and arm 2 out
Arm 1 and arm 2 in
Arm 3 up
Arm 3 down
Angle tool inwards
Angle tool outwards
If joystick setup is set to
Auto and Extra function is not
activated on the machine.
30 – English
OPERATION
Transport mode - Crawl
Rotate tower
counterclockwise
Rotate tower clockwise
Arm 1 in
Arm 1 out
Arm 2 down
Arm 2 up
Arm 2 telescope out
(DXR310)
Arm 2 telescope in
(DXR310)
Arm 1 and arm 2 out
Arm 1 and arm 2 in
Arm 3 up
Arm 3 down
Angle tool inwards*
Angle tool outwards*
Caterpillar tracks
backwards **
Caterpillar tracks forward
**
* The function works
even if the right button on
the right joystick is depressed. This can be useful if you
simultaneously want to run arm 1 and 2 in parallel.
** The speed of the caterpillar tracks can be adjusted with
the tool speed potentiometer.
If joystick setup is set to Auto or
Extra 1/Extra 2.