Husqvarna DXR250 Operator's Manual page 65

Oil filter
CAUTION! Allow the machine to cool. Hot
!
oil can cause severe burn injuries.
• Undo the air filter so that the overpressure in the tank
is discharged.
• Thoroughly clean the outside of the filter and the
surrounding parts.
• Remove the filter cover. Lift up the sealing ring, the
spring and the filter holder together with the filter
cartridge.
• Remove the filter cartridge from the filter holder.
• Check whether there is an unusually large amount of
large metal particles or sealing compound in the filter
holder. If this is the case the machine's hydraulic
system must be checked for faults.
• Clean the filter holder with degreasing agent. Rinse
with warm water and blow dry using compressed air.
• Install the new filter in the filter holder and put it in the
tank. Install a new sealing ring.
• Install the spring and the filter cover.
Air filter
• Thoroughly clean the outside of the filter and the
surrounding parts.
• Replace the filter.
MAINTENANCE AND SERVICE
–
English 65