Troubleshooting; Error Messages - Husqvarna DXR250 Operator's Manual

Error messages

There are two types of error messages that can appear on the display:
• Service messages - These messages do not represent any direct danger for the operator or the machine.
• Warnings - These warn of faults or safety defects that can cause mechanical damage.
All acknowledged fault messages remain as small yellow or red warning triangles in the service field and can be
accessed by going to the service menu and selecting 'Warnings'. The machine has 2 warning logs and a list of active
warnings. The messages are listed in order of priority, highest priority first.
For more information, please see the 'Warnings' section.
When a fault that has in some way restricted the machine's functions ceases, a message appears on the display. This
message must be acknowledged for the machine to return to full functionality.
Service messages
Message on the display
Oil filter need to be changed
Low battery
Left joystick button on left joystick activated
during power up. Button has been disabled.
Right joystick button on left joystick activated
during power up. Button has been disabled.
Left joystick button on right joystick activated
during power up. Button has been disabled.
Right joystick button on right joystick activated
during power up. Button has been disabled.
Up/Down movement on left joystick activated
during power up. Up/Down movement has
been disabled.
Left/Right movement on left joystick activated
during power up. Left/Right movement has
been disabled.
Up/Down movement on right joystick activated
during power up. Up/Down movement has
been disabled.
Left/Right movement on right joystick
activated during power up. Left/Right
movement has been disabled.
Thumb switch on right joystick activated
during power up. Thumb switch has been
disabled.
Thumb switch on left joystick activated during
power up. Thumb switch has been disabled.
Connection to terminal radio failed. Please
check battery level and restart terminal.
Cable connection established between
terminal and machine but no control modules
found. Please check cable and control
modules.
Radio connection established between
remote control and machine but no control
modules found. Please check control modules
and CAN connection in machine.
66 – English

TROUBLESHOOTING

Indication on the
machine
Flashes 3 times with
the work lighting.
No indication on
machine.
Cause
The oil filter must be
replaced.
Low battery level in
terminal.
Joystick activated
during terminal start
up.
The terminal can not
communicate with the
terminal radio
The terminal can
connect to the
machine but not to
PLC modules.
The terminal can
connect to radio in
machine but not to
PLC modules.
Possible action
Replace the oil filter.
Change battery or
connect orange cable.
Check joystick value in
test menu (terminal
diagnostics). Restart
terminal.
Change battery, check
cables to terminal radio.
Check fuses to the PLC
moduels, check supply
and CAN cables to the
modules.