Joystick Pattern - Husqvarna DXR250 Operator's Manual

HOUR METER
SERVICE
The operating hours for the machine (the time when the motor is on) are saved in the control modules and can be read
in the terminal.
When the remote control (terminal) is connected to the machine, can the operating hours be read in online mode.
When the remote control (terminal) is disconnected to the machine the operating hours can be read in offline mode.
Measurement refers to the operating hours when the current control is connected to the machine. If the machine has
been operated with another control, the information concerning operating hours will not be correct.

Joystick pattern

The joystick pattern changes the operation of the remote control. The operational pattern changes as below when the
different patterns are selected.
SERVICE
Joystick pattern - ISO
Work mode / Transport mode - Crawl
Arm 2 down
Arm 2 up
Arm 3 down
Arm 3 up
If joystick setup is set to
Auto and Extra function is
not activated on the
machine.
SETTINGS
HOUR METER
TUNING
JOYSTICK
[SAE]
Excavator control
(default)
JOYSTICK PATTERN
[PAT3]
Transport mode - One hand
Arm 2 down
Arm 2 up
Arm 3 down
Arm 3 up
If joystick setup is set to
Auto and Extra function is
not activated on the
machine.
[ISO]
Backhoe control
E1
English – 43