Toshiba RAV-SM304MUT-E Service Manual page 89

No. Part name
Electric
2
parts cover
Adjust
3
corner cover
AMP Air Conditioning
Procedure
1. Detachment
1) Perform work of procedure 1 -1.
2) Take off screws (Ø4 × 10, 3 pcs.) fixing the
electric parts cover.
3) Remove the electric parts cover from the
temporary hanging hook of the electric
parts cover, and then open the cover.
2. Attachment
1) Close the electric parts cover and hook the
cover hole to the temporary hanging hook.
2) Tighten the fixing screws. (Ø4 × 10, 3 pcs.)
1. Detachment
1) Perform work of procedure of 1 -1.
2) Turn clockwise screws (4 positions) at the
suction port corner until adjust corner
cover rises up.
NOTE)
When you work, keep the torque at below 12N•m.
Do not use an electric screwdriver; otherwise the
mechanism of adjust corner cover may be
damaged and not be removed.
3) Pull downward the risen-up part of adjust
corner cover and remove it.
4) Remove the strap of adjust corner cover.
2. Attachment
1) Attach the strap of adjust corner cover to
the panel, hook claws of adjust corner
cover to the panel corner, and then push
the opposite side into the panel.
2) Turn screws (4 positions) of the suction
port corner counterclockwise until bump
between adjust corner cover and panel
disappears.
NOTE)
When you work, keep the torque at below 12N•m.
Do not use an electric screwdriver;
otherwise the mechanism of adjust corner cover
may be damaged and not be removed.
Screws
Unnecessary to remove this hook.
– 89 –
www.ampair.co.uk | sales@ampair.co.uk
Remarks
Temporary hanging hook
Screw
1
2
Torque~12N·m
1
2
3
Torque~12N·m