Monitoring And Controlling Iec101 Device Communication - ABB COM600 User Manual

Station automation

Hide thumbs Also See for COM600:

Table of Contents

1MRS756703

4.5.

Station Automation COM600

User's Manual

You can also take a channel into use or out of use as described in this section.

To monitor and control IEC101 Channel activity:

Select the channel you want to monitor in the object tree of SAB600.

Right-click the channel.

Select Online diagnostics.

Figure 4.4-1 IEC101 Channel Online Diagnostics

In the Diagnostic counters field, you can monitor the channel activity. The available

attributes can be seen in Figure 4.4-1. To reset Diagnostic counters, click Reset counters.

You can take an IEC101Channel into use by marking the In use check box. If you unmark

the check box, the channel is taken out of use. Diagnostic counters are updated every 2

seconds. To update them manually, click Refresh.

Monitoring and controlling IEC101 Device

communication

The IEC101 Device communication can be monitored with the Online diagnostics

function. You can also take a device into use or out of use as described in this section.

To monitor and control IEC101 Device communication:

Select the device you want to monitor in the object tree of SAB600.

Right-click the device.

Select Online diagnostics.

IEC 60870-5-101

Master (OPC) 3.3

IEC101_Subnetwork_Online_Diagnostics.bmp

Table of Contents