ABB COM600 User Manual page 64

IEC 60870-5-101
Master (OPC) 3.3
64
Station Automation COM600
User's Manual
<17> :=Event of protection equipment with
time tag
<18> :=Packed start events of protection
equipment with time tag
<19> :=Packed output circuit information of
protection equipment with time tag
<20> :=Packed single point information with
time tag
<21> :=Measured value, normalized value
without quality descriptor
<30> :=Single-point information with time tag
CP56Time2a
<31> :=Double-point information with time tag
CP56Time2a
<32> :=Step position information with time tag
CP56Time2a
<34> :=Measured value, normalized value
with time tag CP56Time2a
<36> :=Measured value, short floating point
value with time tag CP56Time2a
<37> :=Integrated totals with time tag
CP56Time2a
<128 :=Parameter byte string
<130> :=101 Encapsulated SPA bus reply
message
Process information in control direction (station-specific parameter)
<45> :=Single command
<46> :=Double command
<47> :=Regulating step command
<48> :=Set point command, normalized value
<49> :=Set point command, scaled value
<50> :=Set point command, short float point
value
<51> :=Bitstring of 32 bit
<131> :=Parameter byte string
<133> :=101 Encapsulated SPA bus message
System information in monitor direction (station-specific parameter)
<70> :=End of initialization
1MRS756703
M_EP_TA1
M_EP_TB1
M_EP_TC_1
M_PS_NA_1
M_ME_ND_1
M_SP_TB_1
M_DP_TB_1
M_ST_TB_1
M_ME_TD_1
M_ME_TF_1
M_IT_TB_1
M_SR_NA_1
M_SB_NA_1
C_SC_NA_1
C_DC_NA_1
C_RC_NA_1
C_SE_NA_1
C_SC_NB_1
C_SC_NC_1
C_BO_NA_1
C_SR_NA_1
C_SB_NA_1
M_EI_NA_1