HP H8/3003 User Manual page 106

H8/3003 Emulator Specific Command Syntax
The following pages contain descriptions of command syntax specific
to the H8/3003 emulator. The following syntax items are included
(several items are part of other command syntax):
<CONFIG_ITEMS>. May be specified in the cf (emulator
configuration) and help cf commands.
<ACCESS_MODE>. May be specified in the mo (display
and access mode), m (memory), and ser (search memory for
data) commands. The display mode is used when memory
locations are displayed or modified.
<ADDRESS>. May be specified in emulation commands
which allow addresses to be entered.
<REG_NAME>. May be specified in the reg (register)
command.
Command and error messages which are specific to the H8/3003
emulator are also described in this chapter.
H8/3003 Emulator Specific Command Syntax A-1
A