Table 4-1. Clock Speeds - HP H8/3003 User Manual

Note
Clock source
Internal
4-6 Configuring the Emulator
Executing this command will drive the emulator into the reset state.
cf clk
The clk (clock) option allows you to select whether the emulation
processor's clock will be sourced by your target system or by the
emulator.
M> cf clk=int
You can select the emulator's internal system clock using the above
command.
M> cf clk=ext
You can specify that the emulator should use the clock input to the
emulator probe from the target system. You must use a clock input
conforming to the specifications of Table 4-1.

Table 4-1. Clock Speeds

Chip
H8/3001
H8/3002
H8/3003T
H8/3004
H8/3005
H8/3030
H8/3031
H8/3032
H8/3040
H8/3041
H8/3042
H8/3003 with system
clock divider
Without 64797B
16MHz
(System clock)
8MHz
(System clock)
With 64797B
8MHz
(System clock)
8MHz
(System clock)