Table of Contents
Advertisement
Note
Defaults
Related Information
w
Word. Memory is accessed in a word format, and
when memory locations are modified, words are
changed.
l
Long word. Memory is accessed in a long word
format, and when memory locations are modified,
long words are changed.
m
Mnemonic. Memory is displayed in mnemonic
format; that is, the contents of memory locations are
inverse-assembled into mnemonics and operands.
When memory locations are modified, the last
non-mnemonic display mode specification is used.
You cannot specify this display mode in the ser
(search memory for data) command.
When the <ACCESS_MODE> is w, modifying target memory will
fail if you try to modify memory from an odd address or with data
which byte count is odd. Also, you can't load file which byte count is
odd. Therefore, it is recommended to use the emulator with the default
<ACCESS_MODE> (b).
The <ACCESS_MODE> is b at power up initialization. Display mode
specifications are saved; that is, when a command changes the display
mode, the new display mode becomes the current default.
Refer to the mo syntax information in the User's Reference manual for
further information on use of the mode command.
H8/3003 Emulator Specific Command Syntax A-5
Advertisement
Table of Contents
