Lun Recognition Check - Fujitsu ETERNUS AF250 S2 Configuration Manual

Chapter 8 SAN Connection Settings
8.2 Server Connection Setup
8.2.2

LUN Recognition Check

When connection is completed, confirm that the server recognizes the LUN set to the ETERNUS AF.
■
When Checking Using the Windows Device Manager
The following procedure explains how to check LUN using the Windows Device Manager.
1
Open [Device Manager] and expand [Disk drives].
2
Confirm that the same number of "FUJITSU..." items are displayed as the number of LUNs that are set.
If the example is used, eight "FUJITSU..." items are displayed.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
128
P3AG-1832-04ENZ0