Fujitsu ETERNUS AF250 S2 Configuration Manual page 48

Chapter 4 Connecting Cables
4.2 Drive Enclosure Connection
To help with management of the mini SAS HD cable between enclosures and prevent incorrect connec-
•
tions, make sure to attach the destination labels to the connectors of the cables.
When connecting the mini SAS HD cable between enclosures, check the direction of the connector (the
•
tab must be pointed downward) and firmly insert all the way in.
To disconnect the mini SAS HD cables between enclosures, hold the tab and then pull out the connector.
1
Check the connection destination of the mini SAS HD cables between enclosures.
• The connectors on the cable with the "n" symbol are connected to the DI (OUT) ports on the controller
enclosure.
The connectors on the cable with the "l" symbol are connected to the DI (IN) ports on the drive en-
•
closure.
Tab
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
48
P3AG-1832-04ENZ0