Fujitsu ETERNUS AF250 S2 Configuration Manual page 71

Chapter 5 General Settings
5.5 LAN Cable Connection (for Operation Management)
2
When the RMT port is used, connect the connector of the LAN cable to the RMT port of Controller 0
(CM#0) and Controller 1 (CM#1).
3
Connect the LAN cables of the MNT port to the network of the customer. If the RMT port is used for
remote support, connect the LAN cable of the RMT port to the network for remote support.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
71
P3AG-1832-04ENZ0