Table of Contents
Advertisement
*
ACT Module
General
Operation Voltage
Power Consumption
Dimensions (H x W x L)
Operating Temperature
Relative Humidity
User Connection
Power connector
COM IN RS232
COM OUT RS232
Low-level Audio In/Out
High-level In/Out
Audio
Low-level Audio Input
Low-level Audio Output
High-level Audio
High-level Audio Input
High-level Audio Output
EMC
Electrostatic Discharge
Radiated Electromagnetic
Field
Electrical Fast Transient /
Burst
Radiated Emission
*
The ACT module is not compliant with RoHS European Directive no. 2002/95/EC.
Specifications
9 to 16VDC
Refer to Appendix D: ACE3600 Maximum Power Ratings.
25mm x 95mm x 115mm (1" x 3.6" x 4.5")
-30º to +60º C (-22º to +140ºF)
0-95% @ 50° C without condensation
Molex 2 pin with polarity
Phone 8-pin
Phone 8-pin
4 screw TB connector
8 screw TB
0.8 to 1.5 Vp-p, 300-3300 Hz, Minimum 50 kΩ ±10%
input impedance – 4.6KV isolated.
1Vp-p ±60% - 4.6KV isolated, via Isolation Board.
Maximum 0.05 Ω - Impedance
Minimum signal: 100 mV, 100 µA.
Maximum 30 VAC RMS, 0.5 A RMS
30 V RMS, 0.5 A RMS maximum per one output
IEC 1000-4-2, level 3
IEC 1000-4-3, level 3
IEC 1000-4-4, level 3
EN55022
Specifications subject to change without notice.
Audio Control and Tone (ACT) Module
23-12
Advertisement
Table of Contents
