Table of Contents
Advertisement
While the brightness is displayed, you can
●
/▼ buttons to change the scan
▲
use the
range.
If you press the [USER3] button again, the
●
item for setting the scan range appears as a
screen.
Press the [USER3] button once again to
●
return to the scan range selection screen
(initial screen).
4 Press the Set button.
Recording Simultaneously
By setting [System] to "4K+HD", you can record
When 4K+HD is selected:
●
at the same time.
to "UHQ".
Caution :
Slot B and slot D cannot be used.
●
[Slot Mode] cannot be selected.
●
Clip Cutter Trig is disabled.
●
●
[
Format] to "Quick Time", set [
C D
Rate] to "XHQ" or "UHQ", and use slot C or D.
Memo :
If a recordable SD card is inserted into only
●
one of the slots, images will only be recorded
to that slot.
When recording to one slot is in progress,
●
inserting a recordable media to the other slot
does not enable recording simultaneously
operation, stop recording temporarily, and
start again.
When one of the cards is accidentally
●
removed while recording is in progress,
recording to the card in the other slot will
continue. However, repair of the accidentally
removed card by the recovery function may
fail.
If an error occurs on one of the cards while
●
recording is in progress,recording of the
erroneous card stops, while that of the other
card continues.
40
Bit
C D
Advertisement
Table of Contents
