System Menu - JVC GW-SP100U Instructions Manual

Two-piece 4k camera system
Table of Contents

Advertisement

INPUT1 Mic Wind Cut
For specifying whether to cut low frequencies of
the audio signals input to the [INPUT1] terminal.
Select "On" to reduce wind noise.
INPUT2 Mic Wind Cut
For specifying whether to cut low frequencies of
the audio signals input to the [INPUT2] terminal.
Select "On" to reduce wind noise.
Monitor
For selecting the audio sound to be output from
the monitor speakers and headphones.
Memo :
Even if "Stereo" is selected when the monitor
speaker is selected in the MEDIA mode,
mixed audio sound is output.
Alarm Level
For selecting whether to turn on the warning
tone as well as setting the volume.
The warning tone is output from the monitor
speaker or Headphone terminal.
Test Tone
For specifying whether to output the audio test
signals (1 kHz) during color bar output.
Audio On FULL AUTO
For setting whether to enable Auto for audio
when [FULL AUTO] is set to "ON".
SW Set:
Sets the audio recording mode following the
[CH1/CH2 AUTO/MANUAL] selection switch
setting.
Auto:
Sets audio recording mode to the forced auto
mode.

System Menu

This menu screen allows system-related
settings.
For specifying recording settings, formatting
and restoring of SD card, tally lamp settings,
date/time, time zone, and other settings.
It can also be used to reset the menu settings to
their default values.
Record Set...
For specifying recorded video-related settings.
( ⇒ P55 [Record Set Item] )
Media
→ Format Media
For formatting (initializing) an SD card.
Select a card slot, select [Format] from [Cancel]/
[Format], and press the Set button to format
(initialize) the card.
→ Restore Media
For restoring an SD card.
Select a card slot, and press the Set button to
restore the SD card.
Memo :
This option is not selectable when recording
in Camera mode and in the Media mode.
Setup File
This allows you to save the menu settings as
well as the performance results of shutter speed
and AWB.
It is useful to save settings according to different
shooting conditions.
→ Load File...
Loads the settings.
→ Store File...
Saves the settings.
Memo :
Files can be stored only in the SD card in slot
C or D.
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gw-sp100e

Table of Contents