User Switch Set Item - JVC GW-SP100U Instructions Manual

User Switch Set Item

USER1 - USER4
By assigning one of the following functions
to each of the [USER1], [USER2], [USER3],
[USER4] buttons, these buttons can be used
to control the assigned function (on/off, start,
switch).
Set according to the shooting conditions. Usable
only in the Camera mode.
[Setting Values: None, Bars, Lolux, AE Lock,
Preset Zoom1, Preset Zoom2, Preset Zoom3,
White Balance, Zebra, Marker, Focus Assist,
Expanded Focus, LCD Backlight, Clip Cutter
Trig, OK Mark, Load Picture File, Histogram,
Spot Meter, Operating Speed Select,
TC Preset, SDI(Moni) Out Chara...]
Lolux
To increase the sensitivity when in dim
surroundings, set a value in the Lolux mode.
Spot Meter
For specifying the operation when any of the
[USER1]-[USER4] items is set to "Spot Meter".
Max & Min:
●
Displays the brightest and darkest areas of
the image.
Max:
●
Displays the brightest area of the image.
Min:
●
Displays the darkest area of the image.
Manual:
●
position.
AE Lock
For specifying the operation when any of the
[USER1]-[USER4] items is set to "AE Lock".
AE:
●
function of Gain, Iris, or Shutter when the
user button that is assigned "AE Lock" is
pressed.
AE/WB:
●
Balance and the Auto function of Gain, Iris, or
Shutter when the user button that is assigned
"AE Lock" is pressed.
Memo :
This feature only works when Iris, Shutter or
●
Gain is set to Auto mode.
"AE Lock" is canceled when the button
●
assigned with "AE Lock" is pressed, or when
any of the functions that can be locked is
operated regardless of the mode (Manual or
Auto).
43