Table of Contents
Advertisement
LCD/Monitor Menu
This menu screen can be used to specify
settings related to the LCD monitor and the
settings related to the data displayed over
the images output from the SD(Moni) output
terminal and AV output terminal.
Shooting Assist...
Menu for setting the Shooting Assist function.
( ⇒ P48 [Shooting Assist Item] )
Marker Settings...
For setting items such as the safety zone and
center mark.
( ⇒ P49 [Marker Settings Item] )
Display Settings...
For specifying display-related settings.
( ⇒ P49 [Display Settings Item] )
LCD Contrast
For setting the difference in luminance between
the darkest and brightness areas in the LCD
monitor.
Increasing the value increases the contrast.
LCD Backlight
For setting the brightness of the LCD monitor
backlight.
LCD Bright
For setting the brightness of the LCD monitor.
LCD Peaking
For adjusting the contour of the LCD monitor.
The larger the value, the more the contour is
corrected.
Shooting Assist Item
Focus Assist
For setting whether to add color to the contour
of the focused image upon switching the image
to black-and-white.
→ Type
For specifying the operation to be performed
when the Focus Assist function is enabled.
ACCU-Focus:
●
Enables the Focus Assist and ACCU-Focus
the object becomes shallower to enable
easier focusing. The ACCU-Focus function
switches automatically to "Off" after about 10
seconds.
Normal:
●
Enables only the Focus Assist function. The
focused area is displayed in color to enable
easier focusing. Display color can be
→ Color
For setting the display color of the focused area
when Focus Assist is activated.
Selecting "Multicolor" changes the contour color
in sequence from red to green, and then blue
according to the sharpness of the focus.
Zebra
For selecting whether to display zebra patterns
at the bright areas of the subject.
Select "On" to display zebra patterns or "Off" to
hide.
→ Top
For setting the maximum luminance level for the
zebra pattern display.
→ Bottom
For setting the minimum luminance level for the
zebra pattern display.
Memo :
The relation between Top and Bottom is such
●
that Top>Bottom always holds. To maintain
this relation when setting Top, the Bottom
value is automatically corrected.
48
Advertisement
Table of Contents
