Table of Contents
Advertisement
Unable to start recording.
Camera image is not output
on the LCD monitor.
Camera image is not output
from the video output
terminal.
Playback does not start
after selecting a clip
thumbnail and pressing
the Set button.
The [CH1/CH2] recording
level adjustment knob does
not work.
SD card cannot be initialized
(formatted).
Battery alarm appears even
after loading a charged
battery.
The time code and user's bit
are not displayed.
The date and time are not
displayed.
The actual recording time is
shorter than the estimated
time.
Is the write-protect switch of the SD card turned on?
●
Make sure that the write-protect switch is turned off.
Is the camera recorder set to the Camera mode?
●
Use the [CAM/MEDIA] selection button to switch to the Camera
mode.
Is the camera recorder set to the Camera mode?
Use the [CAM/MEDIA] selection button to switch to the
Camera mode.
Is [A/V Set]
[Video Set]
Is the selected clip a playable clip?
Playback is not possible if the clip has a different video
format setting.
Is the [CH1/CH2 AUTO/MANUAL] switch set to "AUTO"?
●
Is the camera unit set to the FULL AUTO mode?
●
Is [A/V Set]
[Audio Set]
●
Is the write-protect switch of the SD card turned on?
Make sure that the write-protect switch is turned off.
Is the battery too old?
Even in Camera mode or Media mode, the time code and user's
●
bit may not be displayed depending to the type of display.
Is [LCD/Monitor]
●
To display the time code and user's bit, set it to "TC" or "UB".
The date and time are only displayed on the Display 1 and Display 2
screens in the Camera mode (during shooting).
The recordable time may be shorter depending on the shooting
conditions or the subject.
67
[HDMI/SDI Out] set to "Off"?
[Audio On FULL AUTO] set to "Auto"?
[Display Settings]
[TC/UB] set to "Off"?
Advertisement
Table of Contents
