Table of Contents
Advertisement
Gimbal Set...
For specifying settings related to gimbal
operation.
( ⇒ P58 [Gimbal Set Item] )
Camera Cable Length
For selecting the length of the camera unit cable
to be used.
When the signal transmission cable is used,
you do not need to set the cable length.
Tally Lamp
For specifying whether to light up the tally lamp
during recording or when a remaining free
space warning occurs.
Language
Switches between languages in the menu
screen.
Reset All
Resets all menu settings.
Memo :
[Date/Time] and [Time Zone] cannot be reset.
●
This item is not selectable when recording in
●
Camera mode and in Media mode.
Date/Time
For setting the year, month, day, hour, and
minute.
Memo :
The display order of the date (year, month,
●
day) follows the setting in [Display Settings]
[Date Style]. However, the 24-hour format
is used for the hour display regardless of the
[Time Style] setting.
Time Zone
For setting the UTC time difference in units of
30 minutes.
Memo :
If [Date/Time] is already set, the [Date/Time]
●
item is automatically adjusted when [Time
Zone] is altered.
Firmware Update
unit or lens to the latest ones.
(No explanation will be provided on the website
until the program for updating this Video Unit's
Memo :
Any slot other than slot D cannot be used for
●
●
updated.
Turn OFF the power, and then turn ON the
●
will change to the normal screen.
System Information
→ Version(Camera)
Display example : 0000-0000
→ Version (Lens)
The version of the lens is displayed on the
upper row and the accessory version is
displayed on the lower row.
Display example : 0.0
Memo :
●
version to be detected. In this case, the
If the accessory version cannot be obtained,
●
the lower row is not displayed.
→ Fan Hour
For displaying the usage time of the internal fan.
Memo :
Under normal environment, dust will
●
accumulate on the internal fan when the
camera system is used over a long period.
Dust may enter the camera system especially
if it is used outdoors. This may affect the
image and sound quality of the camera
system. Check and replace the fan after
every 9000 hours (suggested guideline).
→ Open Source License
Displays the license for the open source
software used by this camera system.
54
0.0
Advertisement
Table of Contents
