Clip (Recorded Data) And Clip Name - JVC GW-SP100U Instructions Manual

Clip Set
→
Enter any of the 36 characters including
alphabets (upper case) and numbers (0 to 9)
using the software keyboard.
Memo :
When [Main Menu]
●
[Record Format]
However, it is recorded as the display name
of the clip in the thumbnail display.
→ Reset Clip Number
For assigning a new number (Clip Number) by
resetting it (0001).
Select [Reset] and press the Set button to reset
the number.
When [ Format] is set to "AVCHD", the clip
C D
number is reset to "00000".
When other clips exist on the SD card, the
smallest available number is used after reset.
Example:
●
"ABCD0001" already exists on the SD card,
"ABCD0002" will be assigned.
[System] [Record Set]
[ Format] is set to
C D

Clip (Recorded Data) and Clip Name

When recording is stopped, the images,
●
audio and accompanying data which are
recorded from start to stop are recorded as
one "clip" on the SD card.
An 8-character clip name is automatically
●
generated for the recorded clip.
When [Main Menu]
●
[Record Format]
"AVCHD", the clip name generated consists
of only the Clip Number (5-digit number).
Example: In the case of QuickTime
ABCG0001
Clip Number
A number in automatic
ascending order is assigned in
the recording order.
The Clip Number can be reset
by using "Reset Clip Number".
Clip Name Prefix (any four alphanumeric
characters)
This is set to "xxxG" ("xxx" denotes the last 3
digits of the serial number) by default.
Memo :
Before recording starts, you can set any
●
Changes cannot be made after recording.
●
57
[System] [Record Set]
[ Format] is set to
C D