Warning display on the monitor, tally lamp indication and warning tone are as follows according to
the error status.
Fan Maintenance Required
Getting Overheated.
Please Turn Power Off.
Camera is Getting
Overheated.
Please Turn Power Off.
Please Check the Lens.
Gimbal Initialization
Failed. Turn Power Off
Turn Back On Later
Rec Inhibited
Usage time of the fan has exceeded
9000 hours.
The battery has exceeded the
●
The power turns off
●
automatically after about 15
second.
The internal temperature of
●
the camera unit or video unit
temperature.
The power turns off
●
automatically after about 15
second.
Initialization of the lens failed.
●
The lens cannot perform focus
●
operation.
The gimbal cannot be initialized
correctly due to an obstacle.
An external force is applied to the
gimbal during initialization.
[REC] button is pressed when the
write-protect switch of the SD
card is set.
65
If the error persists, please contact
the local dealers in your area.
Check the fan and replace
accordingly.
For more details, please contact
the local dealers in your area.
Memo :
You can check the usage time
●
of the fan in [System]
Information]
[Fan Hour].
Wait until the temperature
●
drops or replace the battery.
If the error persists, please
●
contact the local dealers in
your area.
Wait until the temperature
●
drops.
If the error persists, please
●
contact the local dealers in
your area.
Turn OFF the power, and then
●
turn ON the power again.
Turn OFF the power, remove
●
the lens, mount the lens again,
and then turn ON the power.
Turn OFF the power, make sure
that there is no obstacle around
the gimbal unit, and then turn ON
the power again.
Turn off the write-protect switch of
the SD card, or insert a recordable
SD card.
[System