Table of Contents
Advertisement
®
ABB i-bus
EIB / KNX
3.2
Parameters
3.2.1
Parameter window
"General"
10
Commissioning
Note:
The default settings for the options are underlined,
e.g. Options: no/yes
Fig. 9: Parameter window "General"
Behaviour after bus voltage recovery,
Behaviour after mains voltage recovery,
Behaviour after programming
Options:
No reaction
Send output and threshold values immediately
Send output and threshold values with a delay
The parameters are used to set the behaviour after bus voltage recovery,
mains voltage recovery and programming.
Option: No reaction = Send no values
Option: Send output and threshold values immediately = Send values
immediately
Option: Send output and threshold values with a delay = Send values
with a delay
Note:
The Send delay is set separately and applies to all three
parameters.
Advertisement
Table of Contents
