Line Fault Compensation Via Cable Length - ABB AE/S 4.2 Product Manual

®
ABB i-bus EIB / KNX
3.2.4.1 Line fault compensation
via cable length
Commissioning
Fig. 20: Parameter Line fault compensation "via cable length"
Length of the cable, single distance [1...255 m]
Options: 1...100...255
For setting the single cable length of the connected temperature sensor
PT100.
Cross-section of the conductor value * 0.01 mm2 [1...400]
Options: 1...150...400 (150 = 1.5 mm
This parameter is used to enter the cross-section of the conductor to which
the PT100 is connected.
2
)
29