Siemens F IWLAN Operating Instructions Manual page 4

Preface
Trademarks
The following names marked with the ® symbol are registered trademarks of Siemens AG:
● HMI
● SIMATIC
● WinCC
Style conventions
This manual uses the following style conventions.
Style Convention
"Add screen"
"File > Edit"
<F1>, <Alt+P>
Please observe notes labeled as follows:
Note
A note contains important information about the product described in the manual and its use,
or a specific section of the manual to which you should pay particular attention.
Naming conventions
This manual uses the following naming conventions.
Term
Plant
Actuate
Range name
Figures
This manual contains illustrations of the described devices. The illustrations can deviate from
the described device as originally supplied.
4
®
®
®
Scope



Operational sequences, for example, shortcut menu commands
Keyboard operation
Terminology that appears in the user interface, for example
dialog names, tabs, buttons, menu commands
Required input, for example, limits, tag values.
Path information
Applies to
System

Machining center

One or more machines

By means of the touch screen on the HMI device

By operating a mouse on the HMI device

Describes an effective range which is recognized by an

HMI device
Operating Instructions, 08/2010, A5E02453837-01
PRELIMINARY II
1.7.2010
Wireless Teach Pendant F IWLAN V2